污水處理曝氣鼓風機主要用于污水處理行業曝氣鼓風機，有的行業也叫曝氣鼓風機，主要是在鼓風機的出口接管道至污水處理池底部，進行曝氣，使污水處理池中的生物活性物能充分與污水中的物質接觸，從而達到除污的目的。

　　污水處理曝氣鼓風機為離心式單吸入雙支撐結構，由電機或汽輪機經彈性柱銷聯軸器驅動鼓風機傳動。從電機或汽輪機后端看，鼓風機轉子逆時針方向旋轉，進、出風口朝上。鼓風機殼體由鑄鐵澆鑄而成，具有減振、降噪、耐腐蝕、耐高溫等優點。主軸用優質碳鋼制成，葉輪由普通低合金鋼制成，若壓力過高的話一般采用高強度合金鋼制成。軸承有滾動和滑動的，滾動軸承采用二硫化鉬鋰基潤滑脂潤滑，滑動軸承采用強制供油潤滑。污水處理曝氣鼓風機一般為多級，流量一般在20-500標米每分鐘，壓力一般在3500-20000mmH2O。污水處理多級離心式鼓風機在污水處理方面優于羅茨鼓風機,如噪聲低,效率高,調節方便,不宜磨損,系統效率高,振動小,壽命長,性價比高,節能等等.以上資料由湖北風機廠的章秀坤提供。污水處理曝氣鼓風機主要使用于:污水處理廠鼓風曝氣,工業污水處理曝氣,小型生活污水處理曝氣,醫院及實驗室污水處理曝氣.

　　污水處理曝氣鼓風機主要有以下幾種:

　　1.離心式鼓風機:噪聲低,效率高,風量大,振動小.

　　2.羅茨鼓風機:噪音較大.壓力高,風量大.

　　瑞柘生產銷售的羅茨鼓風機便經常在污水處理曝氣環境中使用，也有一些市政工程的水生態治理項目選用瑞柘沉水式羅茨鼓風機!具體的應用案例在我們的網站上有很多!您可以參考了解一下!

　　3.回轉式鼓風機高效節能,噪音低,轉速低,壽命長.

　　4.水環式鼓風機.靜音,無油,環保.

　　5.磁懸浮鼓風機，清潔無污染噪音低節能環保

　　Sewage treatment aeration blowers are mainly used for aeration blowers in sewage treatment industry. Some industries are also called aeration blowers. The outlet of the blowers is connected to the bottom of the sewage treatment tank for aeration, so that the bioactive substances in the sewage treatment tank can fully contact with the substances in the sewage, so as to achieve the purpose of decontamination.

　　The sewage treatment aeration blower is a centrifugal single suction double support structure, which is driven by the motor or turbine through the elastic pin coupling. From the rear end of the motor or turbine, the blower rotor rotates counterclockwise, and the air inlet and outlet face upward. The blower shell is cast from cast iron, which has the advantages of vibration reduction, noise reduction, corrosion resistance and high temperature resistance. The main shaft is made of high-quality carbon steel, and the impeller is made of ordinary low-alloy steel. If the pressure is too high, it is generally made of high-strength alloy steel. There are rolling and sliding bearings. The rolling bearings are lubricated with molybdenum disulfide lithium base grease, and the sliding bearings are lubricated with forced oil supply. The aeration blower for sewage treatment is generally multi-stage, with a flow rate of 20-500 standard meters per minute and a pressure of 3500-20000mh2o. Multistage centrifugal blowers for sewage treatment are superior to roots blowers in sewage treatment, such as low noise, high efficiency, convenient adjustment, no wear, high system efficiency, low vibration, long service life, high cost performance, energy saving, etc The above information was provided by zhangxiukun of Hubei fan factory. The sewage treatment aeration blower is mainly used for: air blowing aeration in sewage treatment plant, industrial sewage treatment aeration, small domestic sewage treatment aeration, hospital and laboratory sewage treatment aeration

　　Sewage treatment aeration blowers mainly include the following types:

　　1. centrifugal blower: low noise, high efficiency, large air volume and small vibration

　　2. roots blower: noisy High pressure and large air volume

　　Roots blowers produced and sold by Ruizhe are often used in sewage treatment aeration environment. Ruizhe submerged roots blowers are also selected for water ecological treatment projects of some municipal projects! There are many specific application cases on our website! You can refer to it!

　　3. the rotary blower is energy efficient, low noise, low speed and long service life

　　4. water ring blower Quiet, oil-free, environmentally friendly

　　5. magnetic levitation blower, clean, pollution-free, low noise, energy saving and environmental protection