夏季高溫天氣頻發，長期運轉缺少維護保養的羅茨風機，高溫、噪音大等問題一直困擾著客戶。近日有一些合作伙伴詢問有關羅茨鼓風機故障層面的難題，該位好朋友的羅茨風機的聲音忽大忽小，實際也也找不到是哪里難題，鑒于此，小編咨詢了一下我們廠里的工程師。工程師分析羅茨分析噪音忽大忽小可能是因為一下幾種原因引起!

　　下邊我就和大伙兒理性分析下，有關羅茨風機噪聲出現異常的難題，關鍵存有哪方面的故障：

　　1、軸承毀壞

　　軸承毀壞可能會發生該類出現異常噪聲，危害軸承健康度的現象許多，其他配件的故障，也可能引起軸承故障，軸承做為羅茨風機的具體零配件，一旦發生毀壞，就沒法正常工作了。

　　2、風機吸進固態顆粒物

　　如果我們的風機過慮件損壞了，吸進了大批量的固態顆粒物，會致使固態顆粒物卡在葉輪中間，導致葉輪與殘渣顆粒物的互相磨擦，造成風機故障。

　　3、葉輪損壞

　　葉輪出現了很大的縫隙，葉輪中間立即互相磨擦，造成一些不常見的噪聲，也存有那樣一種概率。

　　4、轉速過高

　　假如風機配備轉速比較高的電動機，風機氣動式噪音可能會傳出這類忽大忽小的噪聲。

　　如果我們的風機存有這種故障，卻不能搜索出詳細的緣故，必須大家找尋技術專業的廠商開展修補，必須對風機的故障進行分析，拆卸查驗風機的故障，然后再清除故障。

　　假如企業并沒有技術專業的維修人員，我們還是提議聯絡羅茨風機制造廠家返廠檢修，那樣更有確保一些。

　　High temperature weather occurs frequently in summer. The roots blower, which lacks maintenance for a long time, has been plagued by problems such as high temperature and noise. Recently, some partners asked about the problem of Roots blower failure. The sound of this good friend's roots blower was loud and weak, and the problem could not be found. In view of this, Xiao Bian consulted our factory engineers. The engineer analyzed that the noise of roots may be caused by the following reasons!

　　Next, I will make a rational analysis with you about the problem of abnormal noise of Roots blower. What are the key problems:

　　1. Bearing damage

　　Bearing damage may cause such abnormal noise and endanger the health of the bearing. The failure of other accessories may also cause bearing failure. As a specific part of Roots blower, once the bearing is damaged, it cannot work normally.

　　2. The fan sucks in solid particles

　　If the filter parts of our fan are damaged and a large number of solid particles are sucked in, the solid particles will be stuck in the middle of the impeller, resulting in mutual friction between the impeller and residual particles, resulting in fan failure.

　　3. Impeller damage

　　There is a large gap in the impeller, and the impellers immediately rub against each other, causing some unusual noise. There is also such a probability.

　　4. High speed

　　If the fan is equipped with a motor with a relatively high speed, the pneumatic noise of the fan may emit such large and small noise.

　　If there is such a fault in our fan, but we cannot find out the detailed cause, we must find a manufacturer specialized in technology to repair it. We must analyze the fault of the fan, disassemble and inspect the fault of the fan, and then clear the fault.

　　If the enterprise does not have technical professional maintenance personnel, we still propose to contact the roots blower manufacturer to return to the factory for maintenance, which is more guaranteed.